-
### Describe the bug
There is an unmarked bad block at 0x520000, in partition "kernel". When creating MTD partitions, this bad block is detected, but instead of marking it, the kernel tries to erase …
-
Hello,
I am trying boot from NAND with yocto generated files. I am able to flash the images using sam-ba-3.7. I am getting the below error while booting. Can someone help to resolve this issue.
I…
-
## Bug report
Tested on W25N01 with our custom board and original driver, W25N02 with our driver, and W25Q128 with Foxeer H743 and original driver.
After a full write (Until GCS says "chip full, lo…
-
Luckfox:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
mtdblock0 31:0 0 256K 0 disk
mtdblock1 31:1 0 256K 0 disk
mtdblock2 31:2 0 512K 0 disk
mtdblock3 31:3 0 4M…
-
Shorting two pins to enter EDL on E5788, and when I run a command `edl --loader ENPRG9x55.mbn printgpt` I get `AttributeError: 'NoneType' object has no attribute 'NAND_DEV0_CFG0'`:
```
$ ls E5788
…
-
I need to ask something regarding led color, because, I have a problem on a console, that when boot without sd, I get the white led, because has no boot.firm inside the nand, but when boot with sd, I …
-
Right now, NAND Telemetry is pretty scuffed, and needs to be properly communicated with firmware.
Currently, only passed in velocity as a singular value, which means that the twist is impossible to…
-
I am using a debian 12 image created with your tool.
`./buildimg.sh bpi-r3 bookworm`
After a system update and upgrade I am not able to boot the system anymore.
I am getting:
```
## Erro…
-
Since Delta is using melonDS to provide the DS emulator, I guess adding support for DSi emulation should not be complicated?
-
看到你也在研究 IPQ5018,我最近也在搞这个,但我水平实在太业余,网上找到一些源码算是编译出来了,但因为试的机子是 PZ-L8,使用的是 ESMT F50D1G41LB 闪存,启动时就识别不正常,前一句还正常识别nand: device found, Manufacturer ID: 0xa1, Chip ID: 0xa5,后面就是nand: unknown nand 2gib 1,8v 8-…