-
I'm using `Armbian_5.59_Nanopiair_Debian_stretch_next_4.14.65.img` on [NanoPi Neo Air](http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Air).
System -> Hardware option looks like this:
![t…
-
Hi All,
I need to update a project I created a few years ago for a data acquisition project for work. The whole project needs to be refreshed and I need to build 5 of these right away. Probably m…
-
> Once finished, you will find u-boot.bin, zImage, and rootfs.tar.gz in buildroot/output/images you can now flash these to your SD card.
How to flash it - in one boot partition, in two partition (o…
-
gpio says.. on NEO2.....root@neo2:~/WiringNP# gpio readall
piBoardRev: Unable to determine board revision from /proc/cpuinfo
-> Is not H3 based board
-> You may want to check:
-> http://www.l…
-
Hi,
I am building on NanoPi Air Neo which uses same chipset as Raspberry 3.
Unfortunately, I need to use newer kernel 4.13.13-sunxi I get the following error in dmesg
`
[ 117.869421] brcmfmac…
mashu updated
6 years ago
-
Can you please include in future releases of this build the soundcore 'snd' and all relevant kernel modules for enabling the onboard audio chipset -- as well as any usb-audio peripherals?
-
### Creating a bug report/issue
- [x ] I have searched the existing open and closed issues
#### Required Information
- DietPi version
G_DIETPI_VERSION_CORE=8
G_DIETPI_VERSION_SUB=23
G_DIETPI_…
-
https://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO3
PLS add example for adding new boards
-
I'm experiencing some issues when driving 6 or more pixels.
It seems that the SPI lib or hardware inserts a small delay of 5µs eacht 60-70 bytes transferred.
[screenshot](https://ibb.co/mD9vZx)
…
-
This is actually not an issue report.
> The NanoPi Neo Air is a very minimalistic SBC. Measuring only 40x40mm, it is probably one of the smallest SBC around.
FYI:
The page below was first pub…