-
### The problem
The LD2420 sensor works fine with the NodeMCU. But when I connect to a MQTT Broker with esphome then I get weird values.
The values are jumping very high and then back again. Why cou…
-
I am trying to connect ov7076 camera with nodemcu but there are no pin diagram available for the same. As nodemcu have storage equal to 4MBytes and memory 128KBytes. Is there any possibility to use it…
-
ich habe diesen ESP32
ESP32 Entwicklungsplatine NodeMCU Module: ESP32 Typ C NodeMCU Development Board, ESP-WROOM-32, 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Integrated, CH340C…
-
This a plea for @AndiDittrich & @serg3295 to join forces and to bring NodeMCU-Tool back to the spotlight one way or the other.
- This project hasn't been updated in 3y.
- The fork at https://githu…
-
How would this work on a NodeMCU? I don't see where in the sketch to change the pin number. The comments mention pin 2, but there isn't code that sets pin 2.
-
~~Ideally we can support both IDF 3 _and_ 4 (i.e. the NodeMCU branches `dev-esp32-idf3-final` and `dev-esp32`).~~
NodeMCU firmware `dev-esp32` is now on IDF ~4~ 5 (as per https://github.com/nodemcu…
-
can you help me convert it to nodemcu esp-12e using ESP.getVcc();
thanks
-
I was wondering if you could help me using the select plus doorbell with a rf receiver on a NodeMCU. I tried using your library but i couldn't get it working....
-
Run vanilla script on 6 lixie and 10 lixie arrays with the same results on two different nodemcus: all but two functions work great... prog_bar() and rainbow_count();
1. prog_bar();
- always cra…
-
Can I upload this to a nodemcu and will it work with a 32x32 led matrix?