-
#### Description
Nordic Semiconductors just released version 1.10 of the Product Specification for nRF52840 including the following change:
CRYPTOCELL – Updated description
Indeed, the do…
-
Hi All,
I'm using nRF9160DK PCA10090 Version 0.9.0 and I want to update the Cellular Modem Firmware using nRFConnect 3.8.0 Programmer v2.0.0. Debug Probe is switched to the nRF91 side.
The cur…
-
**Describe the bug**
I'm using a Thingy91 board (nrf9160) and I want to read samples from the on-board ADXL362 acceleremoter using the new sensing subsystem. I updated my dts overlay accordingl…
-
I'm having issues when interacting with the pdm peripheral via this library. Whatever I do, it results in an error: `Error: bug? LR (0xffffffb8) didn't have the Thumb bit set` which I've had little lu…
Sheap updated
3 years ago
-
Two device tree overlays cannot specify chip-select pins on a single SPI device.
For example, if a board revision introduces a device on an SPI bus, and then a shield also introduces a device on th…
-
**Describe the bug**
RTT logs are not shown after a reset.
**To Reproduce**
Steps to reproduce the behavior:
1. clone https://github.com/tweedegolf/nrf9160-rust-starter/tree/rtt-after-reset
…
-
It would be good to have a checklist in the source file of every example, to ensure people trying to use examples for different chips/boards know what they need to do. This is a VERY common question i…
-
**Describe the bug**
This issue is similar to https://github.com/zephyrproject-rtos/zephyr/issues/67227 but has to do with _board-specific_ overlays defined within a shield directory in a Zephyr modu…
-
Having worked with a few different modems lately (nRF9160, Quectel BC68, ESP8266) I note they all have APIs to open sockets, and read/write, etc, but they're all different. The nRF9160 uses a BSD-like…
-
Hi! Great idea.
But how do you connect the SD card to the nRF9160?
BTW. Are you using the dongle or the DK board?
E3V3A updated
4 years ago