-
Hi all,
NSPanel (fw 1.4.0) in Homebridge works but shows the status of the channels wrong. If I turn on the CH1, after that shows same CH2 is ON.
If I turn off CH2, after a few seconds the indicat…
-
- [ ] I have read the [FAQ](https://github.com/Genymobile/scrcpy/blob/master/FAQ.md).
- [ ] I have searched in existing [issues](https://github.com/Genymobile/scrcpy/issues).
**Environment**
-…
-
I'm collecting info about the Coordinator and Repeater mode for the builtin Zigbee module.
My NSPanel Pro was root activated since version v1.5.6. To switch between the two modes you need v2.2.0 or…
-
I tried using ESPHome NSPanel Lovelace UI and what threw me off was how slow it felt.
To put real numbers to that feeling, I compared this firmware to Blackymas' NSPanel_HA_Blueprint by recording t…
-
Can anyone explain me what the function is of the "manual" tab when adding a light? The other options are HA and openhab..
There are no fields that can be filled in in my setup, but an option to se…
-
Currently the integrations discovers only one entity
![image](https://user-images.githubusercontent.com/5904370/192138330-5d930179-3d57-4c3f-a0b2-465c4cc38648.png)
Here's the diagnostics for NSPa…
-
Hi Mark could update yaml file ?
here is my log file:
INFO ESPHome 2023.9.3
INFO Reading configuration /config/nspanel.yaml...
WARNING GPIO4 is a Strapping PIN and should be avoided.
Attaching …
-
### The problem
This morning I updated my [NSPanel](https://github.com/Blackymas/NSPanel_HA_Blueprint/tree/main) with ESPHome version from 2023.11.4 to 2023.11.6. Unforfunatly the Nspanel does not st…
-
### Describe the bug
- In `tauri dev` mode:
- Window can be drawn on another workspace, i.e. window.show() rerenders the window on the currently active space. **This is the expected behavior.*…
-
I'm using HA companion on my NSPanel Pro and getting illuminance values from the light sensor that the integration publishes.
However, the published values do not make sense (most of the time at ~…