-
Hello,when i use grgsm_livemon catch the gsm information, i meet this error
```
/home/opensourcesdr# grgsm_livemon --arg=bladerf
Warning: failed to XInitThreads()
linux; GNU C++ version 7.3.0; Boo…
-
Hello
I try to test BladeRF under Pothos (built from source) and I get strange errors when using the bladerf soapy sink
[22:22:54.214000] SoapySDR: bladerf_open_with_devinfo()
[22:22:54.394000] S…
-
I receive the following output when running
`grgsm_scanner -d -b GSM900`
```[bladeRF common] init: DEBUG: entering initialization
[bladeRF source] init: Opening Nuand bladeRF with device identi…
-
## Issue Description ##
Connection over wire works but only the first time I attempt to connect UE and eNB. If I disconnect then reconnect all future attempts until I turn off everything for more tha…
-
Hi, I've been able to get the Matlab binding to work in Ubuntu, but not for MacOS. Any suggestions for how to get it going for MacOS?
Thanks much!
Don
-
Hello
i can proficiently use gnss-sdr with nuand bladerf x40 in real time operation only with L1 band.
I like to make the receiver work in multiband mode (L1/L2 or L1/L2/L5) and i tried several .c…
-
Hi,Nuand, I want to try 124MHZ bandwith with BladeRF,but there is something error:
```
cmake -DCMAKE_PREFIX_PATH=/home/init3/SDR/Qt5.7.0/5.7/gcc_64/lib/cmake ..
-- The C compiler identificatio…
-
I am a newbie to SDR and CubicSDR. I am trying to setup bladeRF 2.0 micro (https://www.nuand.com/bladerf-2-0-micro/) to be used with CubicSDR. Is this device supported? When I ran CubicSDR, I tried…
-
Hello,
It looks like your plugin[ https://github.com/Nuand/sdrsharp-bladerf]( https://github.com/Nuand/sdrsharp-bladerf) doesn't work with current SDR# (SDRSharp) revision 1811 (2021-03-29).
Is …
-
Hi all! I'm trying this software with bladeRF micro a4, and got a problem: SDR transmits _something_, but it has no effect on my other devices. Here is what I tried:
1. downloaded latest `brdc` file …