-
Python projects, such as Specter-Desktop, are especially suited to distribution as a Snap. It may take less than an hour for a skilled person to produce such a package.
https://snapcraft.io/docs/pyth…
-
Hello!
I'd like to report that the Samsung SSD Firmware ISO's don't seem to work with Ventoy v1.0.26.
From https://www.samsung.com/semiconductor/minisite/ssd/download/tools/
NVMe SSD-970 EVO …
reedy updated
2 months ago
-
更新的EFI是0.99升14.4的那个版本,求助~~
-
_All of the following was done on linux, but the drive was converted from windows as the conversion failed on linux, with the error mentioner in #15._
I also experienced some issues with reflinking…
-
### Describe the issue you are experiencing
After upgrading to 12.1 (same with 12.0) the system crash with a kernel panic.
Sometimes this only happens if the Home Assistant Core is updated afterward…
-
**Home Assistant release with the issue:**
0.98.0+
**Last working Home Assistant release (if known):**
0.97.x
**Operating environment (Hass.io/Docker/Windows/etc.):**
NUC/Docker/Home …
-
最近升级到Plasma 6后发现更改`default.scheme.yaml`后,RIME对此毫无反应,登出登入与重启多次后均无效。点击Deploy/Synchronize没有一般会跳出来的提示,难道是重载设置这项功能完全坏掉了?
I recently updated to Plasma 6 and I found that RIME doesn't react at all when I …
-
Hi zearp,
I have 2 NUC8i5BEK which I have running since 2021 with various OSX release just fine.
Since to Ventura I have a wakeup issue.
Wake-up via keyboard or mouse (both USB) works just fine …
-
Good morning,
As a means of helping below attached the log:
PS C:\sdrpp_windows_x64> ./sdrpp.exe -s
[2021-10-10 10:24:24.896] [info] SDR++ v1.0.4
[2021-10-10 10:24:24.897] [info] Loading config
…
-
### Describe the problem you are having
**Camera preview displays "No frames have been received, check error logs"**
I have done some testing and setup three clean installs of Home Assistant with …