-
I used a 16GB micro SD card in a SD card adapter and dd'ed the hd1k_combo.img to the SD card.
Using Linux on my RPi4:
```
sudo dd if=hd1k_combo.img of=/dev/sda bs=8M
6+1 records in
6+1 records …
-
I noticed NZCOM.CCP in A.ZIP. Is this an NZCOM CCP binary? If so, I've failed to load it with any of the stock RunCPM.* binaries. Is this doable?
Alternatively, ZCPR 3.3 and 3.4 are major upgrades …
-
Been hunting this one for some time, but since it is not critical it was low priority and has taken some time.
I have replicated the issue into an application, which makes tracking it easier, and i…
-
I tried to use
```
diskdef ch376_8M
seclen 128
tracks 2048
sectrk 64
blocksize 2048
maxdir 1024
skew 1
boottrk 0
os 2.2
end
```
for the harddisk file C.DSK
cpmcp -f c…
hcddr updated
2 years ago
-
I'm using a wired Logitech USB keyboard with my Pano Z80. It works fine if I'm careful about hitting exactly one key at a time. However, if I'm a little sloppy and "rollover" to a new key while the …
-
In the "dev" branch (RomWBW 3.1.1.pre21), the combo hdnew image works just fine. It has the "hdnew_prefix.bin" up front.
I tested the hypothesis by prepending the cpm3 image with the "hdnew_prefix.bi…
-
Hi Curt, Wayne,
I set up a linux box and am trying out your new build script.
First thing i notice is that "copying directory d_bp/u15" is very slow compared to other copies to the image. I kn…
-
HI Wayne,
I installed the fd_nzcom.img on my gotek floppy drive emulator and was pleased to see this boots from the main menu. I created my ZCPR profile (PMS) and setup NZCOM to startup automatically…