-
I'm using the readerKWP example which have initKWP and i'm setting init_success = true; so that in order for a request to be sent but on the logic analyzer nothing happens after the initKWP.
I also t…
-
Hi Ivor,
I had a GSX-R 600 2011, which uses the K-line. Almost a year ago i started writing some code to comunicate with the ECU, probably i didn't found your library because you implemented the KW…
-
The example for esp32 did not work for me.
I remade the example for Arduino, everything works.
I modified the example for Arduino by adding SERIAL and everything worked. What's wrong with the exampl…
-
First I have to tell your library makes it easy. So now the questions. I don't have one of the ICs readily available (they are order be about a week to get) but I found another circuit that is floa…
-
Hello, My control unit has special modes and PID, how can I work with this with your library?
![image](https://user-images.githubusercontent.com/131286400/233135863-821b046d-967e-4393-a24f-91fac19d5d…
-
```cpp
#include
#include "OBD9141.h"
#define RX_PIN 16 // 16 // connect to transceiver Rx for ESP32
#define TX_PIN 17 // 17 // connect to transceiver Tx
bool init_success;
OBD9141 obd;…
-
Hello, i'm trying to use your library on esp32.I use obd.begin(Serial2, RX_PIN, TX_PIN) and pins: rx 13 and tx :32. But Serial2 default pins are 16 and 17.Even if i use the default hardware pins the r…
-
here are the logs made with software that uses k-line only
it uses 17 data with an average sampling rate between 300ms and 400ms
```
ID,Time,SPEED,RPM,ECT,IAT,MAP,MAP(psi),MAF(Kg/h),MAF(Mg/Stk),S…
-
Hello
impossible to operate there is always an error code
src/main.cpp: In function 'void setup()':
src/main.cpp:47:13: error: 'serial_port' was not declared in this scope
obd.begin(serial_port…
-
Hey there.
I've been trying to connect to my VW EDC16 ECU with an arduino.
I have the 33290. It looks like this chip but labeled ZAUO instead of XAIK. I put pin 1 at the square, wasn't 100…