-
Firstly, I wanted to say thank you for creating this! Means I can carry on using some of my older, perfectly working cameras in Unify Protect now!
The docker instructions says
`All you need to do …
-
9FUS camera flashed successfully, I can access it by the webui and stream through rtsp on VLC and onvif on an android app.
I also tried to connect via Onvif to my Reolink NVR RLN8-410 but with no s…
-
I was wondering if y'all had tried adding ONVIF support so that these cameras can be added to common NVR platforms. It would allow greater flexibility and integration into larger systems using a stand…
-
### The problem
Two tplink cameras, model TL-IPC633P-A4 V4.0, TL-IPC43AN-4 V6.0.
Both of then have same onvif protocol v2.01
ipc43an can be configured via onvif UI integration, but the other just…
-
Hello @sr99622
is it possible build an onvif server in windows ?
-
### The problem
Hi,
I've been trying to use ONVIF on HomeAssistant to control my cameras with PTZ.
The firmware used for my Yi cameras is this one : https://github.com/roleoroleo/yi-hack-Allw…
Plop updated
20 hours ago
-
Hello,
I've been looking for a project that would let me create an ONVIF layer on top of multiple RTSP cameras that I have behind a Hikvision DVR (analog cameras). Recently, Unifi Protect added sup…
-
## Describe the feature
Description
I can see that this project should be able to read a HLS stream and translate it to an RTSP stream. In my case I am wanting to do this for Netatmo cameras as me…
-
Hello @roleoroleo
is it possible build an onvif server in windows ?
-
Hello,
When I add the camera it fails with Error: Discovery error: Wrong ONVIF SOAP response message.
In the logs I see the following:
Log ID: 2024-09-26T12:13:01.722Z
App version 2.0.48
12…