-
https://community.openhab.org/t/influxdb-grafana-persistence-and-graphing/13761 is a great tutorial and I think influxdb+grafana is going to become popular with users, but unfortunately the Item name …
-
I have updated to latest version, reinstalled over existing installation.
Running openHAB. The port 3000 is occupied by Grafana.
Kept the same local.json config as before with port 3030 assigned to …
-
* Subject: Habe V200KO1B erfolgreich angeschlossen - Betriebsart aber nur read-only
* Wiki-Page: Adressen
* From: mickey_muc
* Date: Sat, 2 May 2015 21:16:32 UT
* Message-ID:
Hallo,
ich habe mal …
-
# Tested Services on `experimental`:
* ☑ adminer
* ☑ blynk_server - Redirects to blynk.cc
* ☑ deconz
* ☑ diyhue
* ☑ dozzle
* ☑ espruinohub
* ☑ gitea
*…
Slyke updated
3 years ago
-
Hi Daniel
I monitor the power consumption of my heat pump using a couple of Eltako DSZ14DRS'. This works fine for most of the telegrams arriving using EEP A5-12-01. However every 10 minutes these m…
-
-
я так понял у вас openhab 1 версии? Не как не могу разобраться в этом сверх загадочном openhab2
-
## The problem
For charts you can currently only select the time ranges DAY, WEEK, MONTH and YEAR.
If you select year you will see months in the charts.
![Link](https://community-openhab-or…
-
Hey there, I successfully got this to work on my ComfoAir Q350 and it's publishing fine to MQTT (and OpenHAB) and I can see the graphs in Grafana. So far so good, however the rate of information is ra…
-
Hi,
if devices run into issues, like cannot measure a value correctly, there's no chance to communicate this to the controller (e.g. SmartHome system).
Not updating the value means that the currentl…