-
How does diyless's OpenTherm Gateway functionally differ from this OpenTherm Gateway: https://otgw.tclcode.com/ ?
I am only interested in home automation and flexibility type of functions. Will I …
-
**Describe the problem you have/What new integration you would like**
It would be great if ESPHome would support opentherm and directly integrate into Home Assistant
**Please describe your u…
-
Opentherm smartpower allows thermostats to ask more power from the slave. This is not in the code yet.
It uses same schematic and is only software based. In fact, it is just swapping the low/high log…
-
Hi,
I successfully flashed v3.0.14-g963ffbb on an Amica NodeMCU (4Mb), and the wifi connection went smooth, it all seemed to work correctly. I've connected it to a Opentherm Gateway (in case anybody …
-
Add I2C support for LCD 16x2/20x4 and/or OLED Display with I2C Modules as suggested by the OpenTherm Gateway Manual.
![afbeelding](https://user-images.githubusercontent.com/23719607/206928743-81f8a1b…
-
Hello,
Would be nice if your client can set Outside temperature over MQTT by choosing a temperature device from Domoticz.
And a field to send other commands.
Just like in the build-in OpenTherm…
-
Thank you for your project. Now I'm using Wemos D1 Mini32 board (& Tindie Opentherm master shield).
It will be great if your gateway could support Ethernet connection instead of wi-fi. It is more r…
-
Hi,
Thanks for this project! It runs very smooth!
Only one thing I noticed is that I can't use OTA updates when including this library.
The problem is in the __timerISR but have no clue to so…
-
The way I read it in the docs, a heater can either be on/off or proportional. However, many boilers (at least, in NL) can only be modulated using a heating water setpoint. I could use a mapping to spe…
-
..or otherwise be able to modulate the boiler gas valves for better fuel efficiency and longer boiler life?
Am I right in thinking the only way would be for the firmware to make a WiFi connection a…