-
I'm trying to build `Esp32_oscilloscope.ino` using Arduino-IDE 2.3.2 and I'm getting somthing like this:
(output has scrolled out of the output window, so I cannot see where the error initially occur…
-
It's unclear whether this needs to be implemented since there is no use case. The datasheet requires a signal low of 50 us or more. The oscilloscope trace of the RMT output to the WS2812 chain shows …
-
-
## Issue ##
The signal generated by Linien on the output port 1 of the Red Pitaya is significantly noisier than the one generated by the built-in Red Pitaya oscilloscope.
## Description ##
I am …
-
![Captura de pantalla (2)](https://github.com/carla-vila/foto/assets/86434745/1b8214f4-24ad-4616-b862-e7ded9eabd39)
-
- [X] Wire up breadboard
- [X] Render matplotlib graphs
- [ ] Get a raspberry pi 4
- [ ] Add API to switch modes
- [ ] Recreate the circuit on an Arduino board instead of using a breadboard (Ardui…
-
**Environment:**
- OS: Mac 14.2.1
- FW Version: 0.32
- SW Version: 1.4.1-f4beeb1
**Describe the bug**
When viewing the oscilloscope with FFT selected, changing the time configuration or memo…
-
@mck1117 i can easily test at least one hall input using test pad, what is the best stop to hack into on the digital circuitry?
![image](https://user-images.githubusercontent.com/48498823/216065376…
-
Using the addsynth and selecting the oscilloscope tab.
It looks like the oscilloscope function has potential but is incomplete (work in progress?).
1. The oscilloscope apparently shows the same t…
-
Problems with data visualization. The plot became strange if I press pause and then resume after a while.
One possible solution is to reset the plot every time I push pause and then resume.
I…