-
### Category
Other
### Hardware
Heltec V3
### Firmware Version
2.3.7.3.0
### Description
When going through the list of canned messages up/ down mostly skips a entry when letting the button go.…
-
**Describe the bug**
I wrote a C++ program using Npcap SDK in Windows environment where I have enabled Wi-Fi in monitor mode. But the program is unable to capture Wi-Fi 802.11 Beacon packets. Using W…
-
The sampling rate (using the influxdb command, and analysing in influxdb) for my power meter seems too low - It seems to be taken every 2s at best, sometimes with a >10s gap between measurements, duri…
-
Hi LiveKit CLI dev team!
What do you guys think about adding a new source of audio publishing option by listening to incoming multicast audio packets and then publishing it to a room? I think we co…
-
Hi,
I installed this mod recently on the newest 1.21 build and found that when we were near each other the voice chat coming out of a radio would get choppy and then soon after the server would wa…
-
```
What steps will reproduce the problem?
1. Modify hello world, remove the loop
2. Test on a single node
3. Find out that when multiple sends, work fine, when one send, does not work.
What is the e…
-
The documentation and the source code indicate that the maximum "packet" size is 32 bytes:
https://lancaster-university.github.io/microbit-docs/ubit/radiodatagram/
However, if we try to send 32 by…
-
**Describe the bug**
Assertion fault (radio not disabled) in IRQ handler when receiving a radio packet via nRF 802154 driver while tracing with Segger SystemView backend is enabled.
**To Reproduce…
-
Someone has done quite a bit of work in GNU Radio to decode the packets from [Elster power meters](https://github.com/argilo/gr-elster) I'm no GNU Radio expert, but if I provide the sample captures wo…
-
Hello,
I am trying to use LoRaMesher with a t-beam-supreme-s3 and am encountering some difficulties.
I am trying to use the counter example.
The board uses sx1262.
Here is the code I am using:
…