-
It is necessary to develop a printed circuit board (PCB) for the chassis controller.
The general functional system diagram: [Link](https://kpi-rover.github.io/docs/system/architecture)
The PCB r…
-
3D printable enclosure with a bottom and top part
* [ ] Bottom completely closed
* [ ] Bottom with open view to the PCB art
* [ ] Top with cutout for easy access to the jumpers and parts
* [ ] Top…
-
Since the Supra and especially with the Gamma, more and more two-fan solutions are being implemented by many in the community.
As is well known, the back of the PCB is extremely hot, especially th…
-
Hi, first of all, thanks for your guidance. It was very helpful for me to design my own pcb for wireless ke…
-
Thanks for sharing this design. I have successfully assembled my first unit and am typing on it now!
I used PCBWay.com for the order, and while their customer service was excellent, they had some tr…
-
Hi,
First let me thank you for the PCB that you have designed. Its amazing. I ordered one from JLCPCB, but I’ve faced constant parts shortages, which have prevented me from completing the order.
C…
-
Hi there!
For those interested in building a KLOR keyboard you may check [my fork](https://github.com/Lefuneste83/KLOR) of the design including :
- Full height switch version (fully qualified) an…
-
I recently fell into the rabbit hole of the "diy keyboard" community, and picked your great design as a first keyboard to build :)
That went extremely well, "just" working from the first time! Drop…
-
Dear clockworkpi. Love what you are working towards, but there is much work to be done to keep up your end! As a manufacturer advertising a product with the Open-Source Hardware (OSH) emblem, you ar…
-
Design PCB that can be used to fully control the scooter.
It should have:
- [x] ESP32 microcontroller
- [x] Boost converter for headlight led 5V -> 6V (1.1W)
- [x] RGB display
- [x] Power b…