-
A lot of components have gone up in price and/or are no longer available. Currently it is almost impossible to make a unisolder.
By open sourcing the PCBs, updates to the BOMs and footprints would br…
B9KGF updated
2 months ago
-
I think in issue https://github.com/KiCad/kicad-footprints/issues/864 the problem stems from a misunderstanding of the use cases of templates and footprints.
In my understanding:
- Footprints are…
-
When I imported a PCB into FreeCAD it only pulled in lines from "User.3" that are directly drawn in the PCB.
Shapes that are in that layer and come from footprints are not imported. See attached scre…
-
Design a dual VHF/UHF PCB, for use with BOTH a DRA818V and a DRA818U. The board will be larger, so needs a new 3D printed cases for this one too. I imagine this needs a diplexer on the PCB to ensure t…
-
In the BOM there are multiple parts that are actually the same value, or could be unified. Some have different parts in the Mouser BOM, in other places it's only a difference in footprint
* C86, C8…
-
R11 and R14 got no Footprints, but the value of 20 ad 27, is this the right resistor value?
i try to build a PCB for PCBWay, but i saw those are not connected.
- http://www.repo.hu/projects/ringdove/
- schematics capture: [sch-rnd](http://www.repo.hu/…
-
Hi,
first, thanks for that great plugin! I think this is very useful in general, but still missing some features.
I think, if a project is called portable, it should be editable after archivin…
-
Since the position of the holes for the switches is known, there should be possible to add a utility that places the footprints of the switches on a PCB according to the geometric layout of the keyboa…
-
We should set a standard for the numbering/naming of shield-pins, add that to KLC and finally modify all symbols/footprints to adhere to that rule. The three options out there are currently (scanning …