-
# Info
- Which version of Pi are you using: Raspberry Pi Zero 2W
- Which github revision of software: v23.11.01
- Which board version: Fullspec 2.3a
- Which computer is the PiSCSI connected to: …
-
After re-adding SASI hard drive support this has so far only been tested with an Atari and a tweaked Atari SCSI driver version. Since the Atari usually speaks SCSI these tests only have a limited valu…
-
Hi, I have assembled 4 pieces of BlueSCSI V2 devices and only two of them work without problems.
On the other two devices, there is a problem when trying to initialize the hard drive.
When trying …
-
# Info
- Which version of Pi are you using: Pi 4 Model B
- Which github revision of software: v23.04.01
- Which board version: akuker 2.5
- Which computer is the PiSCSI connected to: Mac Quadra…
-
Presently, when you attach a DP device without parameters you get a default `inet=10.10.20.1/24` parameter. However, this inet address range is irrelevant for DHCP / piscsi_bridge setups. We've had se…
-
# Info
From Discord user "speakers#7740"
> I've been messing with piscsi Daynaport ethernet to write a driver for NetBSD. In particular, this is to provide ethernet on my SE30. The driver is bas…
-
# Info
Looking for a way to display the IP address of the Pi with the control board software.
- Which version of Pi are you using:
- Which github revision of software:
- Which board version:
- …
-
# Info
The team has removed SASI support from the current PiSCSI code. The current design/architecture makes it very difficult to make changes and has substantial maintainability impacts.
This …
-
# Info
The Raspberry Pi 5 has been announced with a new SoC. Since the GPIOs are now managed by the RP1 chip, the low level software interface has likely changed.
The PiSCSI code should be updat…
-
I can't get netatalk on the PiSCSI to save icon location / view format at the root level. It works with my older version of netatalk in A2SERVER, but not the newer version. What's interesting is th…