-
I'm looking into using qmk on my Pok3r, and just wanted to know if it's safe to flash qmk_pok3r using pok3rtool? Or are there still any gotchas that I should be aware of?
(I don't know where to pos…
-
HW info:
- Holtek HT32F52352 (Cortex-M0+)
- Macroblock MBI5042GP LED Driver
- GigaDevice 25Q40CT 4Mbit SPI Flash
Tasks:
- [ ] Add photos
- [ ] Add schematic
- [ ] Write firmware patch
- …
-
I find the lack features of pok3r is no mouse keys, if it could be added. then this keyboard is would be complete.
-
The link to the Pok3r's user manual is broken.
The new link is at http://vortexgear.tw/db/upload/webdata4/vortex_20151228744687740.pdf
-
HW info:
- Holtek HT32F1654 (Cortex-M3)
- MXIC 25L4006E 4Mbit SPI Flash
- 3x Macroblock MBI5042GP LED Driver (1 per channel)
Tasks:
- [ ] Add photos
- [ ] Add schematic
- [ ] Write firmware p…
-
HW info:
- Holtek HT32F1654 (Cortex-M3)
- GigaDevice 25Q40CT 4Mbit SPI Flash
- 3x Macroblock MBIA043GP (1 per channel)
CN2 header:
pin 1: 3v3
pin 2: SWDIO
pin 3: SWCLK
pin …
-
- Holtek HT32F1654 (Cortex-M3)
- GigaDevice 25Q40CT
- 3x Macroblock MBIA043GP (1 per channel)
CN2 header:
- pin 1: 3v3
- pin 2: SWDIO
- pin 3: SWCLK
- pin 4: nRST
- pin 5: GND
SEL1 header…
-
I just want to know how hard it would be to add support for the Tab75. I know that the chip is different (HT50xxx vs HT32xxx), and I have no idea what would it mean to start such a port. Could you sha…
-
A feature that I have been wishing for on the non RGB Pok3r is for the PN key to be removed, as it only serves one purpose. Could the functionality of PN be moved to FN, say if the FN key was held for…
-
With CapsLock always as Ctrl, the LED doesn't work for that key.
LED works as intended with SW3 set to 1(CapsLock as Fn), but in that mode, I can't program the key to Ctrl.
Any suggestions?