-
Thank you for this great starting point for MTS designs.
I set up this project on a fresh SD card image (Pynq 3.0.1) for my RFSoC4x2 board, and followed the install instruction.
After power-cycl…
-
Hello -- Thank you for putting together this PR demo on Pynq! Do you have documentation or tutorials explaining how to assemble the static/dynamic regions for partial configurations on the Pynq Z1 boa…
-
hey @dhm2013724 thank you for uploading your code. as you said this runs at a speed of 1fps on pynq ryt? do u think that it is possible to make it run on pynq real time with tiny-yolo (if you further …
-
Hi, I'm currently working with vexriscv on the tul pynq-z2 board. Unlike other people, I need to turn down the clock frequency of the core to make side-channel power measurements more feasible. The st…
-
I 'm trying to run tensorflow on a PYNQ-Z1 board using your PYNQ Project, publicy available at the link https://github.com/hillhao/PYNQ-project, and related to the paper "The implementation of a Deep …
-
Hi, as you know DE10 pro FPGA is very costly board. I have a PYNQ-Z2 FPGA board (board details are here https://www.tulembedded.com/FPGA/ProductsPYNQ-Z2.html). I want to do some research on SIMTight. …
-
I am tring to integrate DPU4.1 to ZYNQ-Z2 board. So I choose Vivado 2022.2 and PetaLinux 2022.2 to generate linux image for SD card.
but when I following[ THIS TUTORIAL](https://github.com/Xilinx/Vit…
-
Could you please share the PYNQ image for ZC706 board?
-
I am working with a RFID SYSTEM using RC522 sensor but I have checked in the manual of PYNQ that there is no function related to RC522 available to be implemented in JUPYTER platform. A function rela…
-
I have been attempting to build a custom PYNQ SD card image for Mercury XU1. However, I require a BSP file for the device **xczu15eg-ffvc900-3-e**. In the case of my Zedboard, I had its petalinux bsp…