-
### BUG DESCRIPTION
After update 6.6.0.15-2.5.2 the PZEM004T no value is shown.
- [x] Read the [Contributing Guide and Policy](https://github.com/arendst/Sonoff-Tasmota/blob/development/CONTRIBUTI…
-
### PROBLEM DESCRIPTION
In berry script, the `gpio.pin_used(gpio.OPTION_A,0)` command always returns -1, even if such a gpio pin is configured. Meanwhile, `gpio.pin_used(gpio.OPTION_A, 0)` correc…
-
Hi,
Is it possible add USE_PZEM004T and add support for PZEM004T Energy monitor for 3 phase by using
USE_SERIAL_BRIDGE and report each phase through that functionality ? May be there is possibil…
-
### PROBLEM DESCRIPTION
Sonoff devices after upgrade to Tasmota 12.0.2 reboot every ~20 minutes with StatusSTK":{"Exception":29,"Reason":"Exception","EPC":["40252ca8",...
### REQUESTED INFOR…
-
### PROBLEM DESCRIPTION
I would use Wiegand GPIO configuration on Esp8266 and ESP-01
I haven't the components
6432 Wiegand D0 Wiegand Data lines
6464 Wiegand D1 Wiegand Data lines
- [ ] P…
-
### PROBLEM DESCRIPTION
ModuleAddress command doesn't work for PZEM-004t V3 energy sensor.
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable box…
-
**Describe the problem you have/What new integration you would like**
Integration of PZEM-016 AC power meter
**Please describe your use case for this integration and alternatives you've tried:**
…
-
### PROBLEM DESCRIPTION
I connect one Pzem-004t-v3 to ESP32. R8 where lowered.
At boot Web UI show 8 phases and then drops to 3 phases (???). Correct values where only for L1 and each seco…
-
### PROBLEM DESCRIPTION
I have 3 PZEM-004t v3 connected to NodeMcu .
Sometimes the voltage is down to 0 for 1 second ( it can be 1 pzem or 3 of them) and the Energy is jumping to enormous value,…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
I tried to upgrade my Sonoff Basic to the latest version (12.3.1) from 11.0.0 but after upgrade, my sonoff basic…