-
Hi!
I found the bluetooth mac with the discovery [NEW] Device 44:17:XX:XX:XX:XX FR:RE22111XXXXXXX
now I'm trying to connect to the radoneye device with python2.7 radon_reader.py -b -v -a 44:17:XX:…
-
### The problem
I haven't confirmed that the code does not work. I have tried a python program that uses the same UUID's as used here and it does not work.
This is the current module UUID's the sam…
-
### The problem
I try to use BLE Client Binary Output to write the value 0x50 to a BT-Characteristic to trigger new measurement values from Radoneye sensor. Until now this is done by a custom compone…
-
I installed radoneye with
pip3 install radoneye
and after putting ~/.local/bin at the beginning of my PATH, I can run
radoneye --help
but when I run
radoneye list
I get this:
```
T…
-
### The problem
I'm trying to use the platform radon_eye_rd200 and even trimming the yaml down to complete basics (no wifi, no captive_portal, no api, etc.), the ESP32 modules will just boot loop. I'…
-
Hi, I'm running the `./radoneye-reader.py` script on a Raspberry Pi 4b with Debian GNU/Linux 12 (bookworm), but get the error:
```
INFO: DEV D8:AB:29:7E:F6:0E: reading device sensor data
ERROR: DEV…
-
Serial: FR:RU2221...
I've setup the integration and let it run for about an hour
but I've noticed the data never gets updated after the initial
fetch upon HA startup.
I have enabled debugging:…
-
I am new to programming in Python. I installed radoneye on my raspberry pi 5 today. I have an older RD200 and ran into a few issues. The issues could certainly be due to me not knowing what I am doing…
-
### The problem
In `radon_eye_listener.cpp` it _only_ listens for devices that start with `FR:R`. However, my brand new Radon Eye (firmware 3.0.1) has a device ID that starts with `FR:I`.
I edited…
-
Hello,
sorry to create an issue here - my question is not related to this integration but more about the radoneye rd200 itself.
I noticed that I have spikes both in the radon graph over time and e…