-
I used your info to successfully connect an Arduino MKR1010 to a Renogy Wanderer 10A (model # RNG-CTRL-WND10) charge controller. The MKR1010 natively has Serial1 on pins 13 (RX) and 14 (TX).
In the…
-
Registries 5018-5021 report in .1C, so 80 would be 8C
Registry 5103 is the status of the battery heater. 0-255 (0 being off, 255 being on-high) Not sure on the intermediate values but it shuts off at…
-
Great work on this, I managed to use it to pair to my 100ah lithium battery via the hub from my laptop. Great little starter kit to build a monitoring dashboard.
-
Hi,
I have three 40A Rover Charge Controllers that are connected using the Renogy communication hub to an Orange Pi with a USB to RS485 converter. They have slave addresses 16, 17, & 18. I'm pollin…
-
Running Raspberry Pi OS on Raspberry Pi Zero W, and getting the following error, hoping someone can help please.
I retrieved the BT-1 Bluetooth Alias and MAC address using nrfConnect on iOS.
Renog…
-
Hi. I try to connect with an esp32 to my battery. Can you help me to understand your code?
Im actually able to connect to the battery and to the service.
I found 3 service uuids and every one ha…
-
Writing to registry 5223 allows you to change the battery address!
-
I am all but certain that this is not an issue with Solar Shed. That being said, I had a perfectly working system running on a Raspberry Pi, everything was being stored in Prometheus, charted with Gr…
-
I tried it today with the
rbt100 lfp12 bt
Every parameter except Charge State was shown. So it works perfectly
Thanks :)
-
I am running a Raspi4 B with native installation of HA.
It seems like there is no easy way to build libscrc on that machine. I was wondering if anybody could supply a binary for that or one could …