-
good evening everyone.
I tried to create RPI 5 pinn images for OctoPi, Repetier-Server and OpenMediaVault.
Unfortunately, this doesn't work and they are not yet available online. Have you ever d…
-
The program worked fine till yesterday. Today I open it and it freeze as soon as I try to click on the GUI. It does not respond to any input.
I've cleared the cache and removed the ~/Library/Preferen…
-
Not sure if this is possible.
For my printers, I usually add GCode to the end of a print to retract 3mm, just to prevent oozing and allow the next print to go down clean, without intervention.
O…
-
### Feedback
Hello,
reading this documentation, it is not stating any need for an MQTT Server.
Reading the Repetier Server Documentation regarding HA integration, there documentation is pointing on…
-
Hi there, I bought a PanelDue 7 and I want to use it with the Radds 1.5 and Repetier firmware. I connected it to the serial port and installed the current firmware 1.23.2 on the PanelDue. I have conne…
-
Hello,
Are there any plans to implement u8glib2 (https://github.com/olikraus/u8g2) to repetier instead of a little deprecated and old u8glib ?
There are some clear advantages over older version …
-
hello, I connect directly from pc to the printer card, everything works fine and connects.
then using repetier software I start printing and everything is fine but after a few minutes the printing st…
-
I am really really new to this so sorry if I'm missing something obvious. I'm trying to build and upload my 3d printer firmware from the commandline. This issue might be related to some of the other i…
-
repetier.0 | 2021-02-02 20:33:41.863 | error | (50632) The id "10_0_0_17." is invalid. Ids are not allowed to end in "."
-- | -- | -- | --
repetier.0 | 2021-02-02 20:33:41.863 | error | at Incomin…
-
If i print a Job over the Serial connection via Repetier-Server the display is not switching into the 'Serial Print Job' Window. If i use Octoprint it switches with Repetier-Server not.
Any Idea why?…