-
Hi,
I finally received my Respeaker: it is a MIPS processor running OpenWrt, so Jarvis will not work out of the box. Others might try the same thing so this thread is to share our experiences.
I…
-
Hello,
I have successfully connected the ReSpeaker Mic Array v2.0 to my Android device and would like to utilize its features, such as far-field voice capture, voice activity detection, direction o…
-
* [x] install re-speaker 2 mics hat to a rpi
* [ ] explore seeed respeaker docs, wiki
* [ ] run basic examples
* [ ] document any issues here
-
Khi chạy catkin_make, gặp lỗi sau:
```
-- +++ processing catkin package: 'respeaker_ros'
-- ==> add_subdirectory(respeaker_ros)
CMake Warning at /opt/ros/kinetic/share/catkin/cmake/catkinConfig.…
-
I would know if will you launch some configuration compatible with the Respeaker core v2.0?
-
Hello,
On my raspberry Pi, I want to make my ReSpeaker 4 mic array be able to turn on and off in idle whenever I want to, so with very few lines of code(preferably), and often. How would I be able…
-
Hello,
i am currently trying to setup the echo canceler on my respeaker core v2.
What i want to achieve is that audio that is played (i use pulseaudio for all audio stuff) get's removed from my mi…
-
Hello,
I'm stumped...
> `wyoming-wakeword.service - openWakeWord
> Loaded: loaded (/etc/systemd/system/wyoming-wakeword.service; enabled; preset: enabled)
> Active: active (running…
-
I am trying to record audio by using microphone.py and I am getting following log then nothing happens.
pi@raspberrypi:~/Desktop/respeaker_python_library/respeaker $ python microphone.py
ERROR:ro…
-
Using this HAT https://wiki.seeedstudio.com/ReSpeaker_4_Mic_Array_for_Raspberry_Pi/
Pi freezes and requires hard reboot when attempting record test per tutorial setup instructions.
Resolved by…