-
When I first boot, the PLLs are locked. When I load the MTS overlay, the lock lights on PLL1 and PLL2 (the two PLLs inside of the LMK) fail to light.
I can replicate the problem by loading the LMK …
-
This is the error, @jack-h
```
Traceback (most recent call last):
File "/home/sonata/dev/ATA-Utils/pythonLibs/SNAPobs/snap_hpguppi/scripts/configure_antenna_streams.py", line 297, in
rai…
-
I can find any instructions on how I can use it and what it actually does?
I have a RFSoC 2x2 board, which I would like to be be able to use the Matlab HDL with.
-
# Env
- macOS 14
- qibolab - commit: https://github.com/qiboteam/qibolab/commit/a514441f7c020b190c7871df90d6892392d0b4da
# Want
- `make view` in `doc` folder should generate and show docs.
…
-
Hi all,
I have been using the RFSoC 4x2 to generate I and Q inputs for an external IQ mixer using DAC_A and DAC_B on the board. I have written a few calibration scripts to compensate for the freque…
-
Hi,
I am trying to replicate the results of your nice demos on a ZCU216 RFSoC Xilinx device.
When I try 03_Resonator_emulator_phase.ipynb, I got into some issues related to the "QickTrainingSoc.py"…
-
Hello, I'm using this driver on Petalinux 2022.2 on a Xilinx RFSoC to receive data from the PL via DMA and dump it to SSD.
Recently, I'm switching to a zerocopy implementation of the software, where …
-
For the ZCU216, the Linux gpio id passed to XRFClk_Init() is incorrect on line 276 of rfsoc.c `ret = XRFClk_Init(485);`, is incorrect. The same applies to line 142 of xrfclk_example_app.c that passes…
-
In branch `py38-dev`
requirements.txt
```
cython
future
katcp
numpy==1.25 # compatibility with RPI
odict
tornado==4.4 # katcp depends on tornado
dcxSt updated
3 months ago
-
I tried the link of the readme: https://rfsoc-frequency-planner.herokuapp.com/
but the online web app is not working. The following message appears:
Application error
An error occurred in the a…