-
I try to setup a alarm device (MS20) on Homey with Rfxcom.
I'm not able to connect it.
Do you have any instruction how to do this?
-
Sorry i'm a complete nono with node. But after docker reset the switches are always put on off (lighting2). If I change the payload to on in the discovery topic of the mqtt it works ok again. I thin…
-
Hello,
I went through closed issues but did not find anything in here yet describing the use of ser2net to connect an RFXCOM. I currently run all my domotics software (Home Assistant, Domoticz, Nod…
-
Hello
Very interested in your project, but don't know now how to declare RFY Somfy devices.
Your Docker container worked (built with your Dockerfile) and my RFXCOM RFXtrx433XL addressed without …
-
[LightwaveRF ](https://lightwaverf.com) is another company that creates smart home devices.
In Home Assistant it's [used by 55 users](https://www.home-assistant.io/integrations/lightwave/).
![im…
-
Hi Maxwell,
I'm having trouble getting **node-red-contrib-rfxcom 2.13.0 to work with the rfx-blinds-in and rfx-blinds-out nodes in Node Red (versions 3.0.2 or 3.1.7) on a Pi4.
1. Bert Weijenber…
-
Hi,
i have cloned your repo (git clone on a new debian wheezy) but when i try "make test", it didnt finished and i have errors like : couldnt find X10.pm or homeeasy.pm
I've made "make install", and …
giejo updated
13 years ago
-
Hi, thanks for your great work.
On a fresh new install (git clone) when i try rfxcom-rx, i ve got some weid values (i have some oregon sensors and X10 ms13)
giejo updated
10 years ago
-
I have noticed that my Oregon Scientific temperature sensors (THGR810) show a state of 0 when configured as a Temperature Sensor. I'm able to see the temperature when I change the device type to Humi…
-
HASS IDs generated for MDREMOTE V106 / V107 (Lightning 5 tab in RFXMngr) result in an error and cannot be added to the configuration:
$ generateId.py -t Lighting5 -s MDREMOTE -p 37191,1
Result:…