-
I have been trying to find P2 128x64 LED panels that I can control with an Adafruit Matrix Portal S3 (ESP32-S3). I have several P4 64x32 panels from Ali Express and a P2.5 64x32 panel from Adafruit th…
-
### Problem to solve
Since the LVGL project has now taken it upon itself to provide some last mile driver/display integration support, the lack of ESP LCD Panel API support is a real missed opportu…
-
Hi,
I recently purchased a P2.5 64x64 outdoor LED Panel https://www.aliexpress.com/item/1005005908894934.html
and the led-multiplexing doesn't seem to work for the 1/16 Scan.
I have an indoor P…
-
Hi community!
I'm a passionate noob trying to learn electronics, and I've spent many hours trying to solve my issues on my own. Now I'm reaching out to you:
I've purchased 3 [LED panels 64x32](https…
oryz0 updated
1 month ago
-
Support for prebuilt RGB LED panels that utilise the [https://github.com/hzeller/rpi-rgb-led-matrix](https://github.com/hzeller/rpi-rgb-led-matrix) libary would be great.
-
I have a 32x32 RGB matrix model "P6(3535)32x32-8S-V1.6" HUB75 interface, made on 24 ICN5020B chips, one 74N138 decoder whose output goes to 16 chips 4953 (2 pieces of P-Channel MOSFET in one package…
-
Following Adafruit's tutorial here: https://learn.adafruit.com/raspberry-pi-led-matrix-display/software?view=all#software
Genuine Raspberry Pi 3, Adafruit matrix HAT. Panels are the 64x32 5mm pit…
-
Hi,
I have one 64x64 panel with 16207S, for the most part the library works and i tried with the setup below:
in the first image - when the panel is filled with blue, everything is connected an…
-
Hello,
I am very impressed by your work and I got all demos running on a Pi3 with a driver HAT ( a red one for three panels in parallel).
But in your FAQ you mention that using three panels is …
-
Hub12 is very similar to Hub75, but the Output-enable has positive level (I think), and of course we can control many more panels with the outputs, as we only need Red or Red/Green and the free GPIO p…