-
目前在rk3568上适配,编译通过了,但是这个仓库都是基于rk3588做的,想复现一下,找不到rknn模型转换前的onnx模型,看了rknn官方git的[ultralytics_yolov8](https://github.com/airockchip/ultralytics_yolov8)库,发下导出的onnx模型输入输出节点和这个仓库不一样
-
I have a NanoPI-RC5 4GB, I installed all the software I needed and then i wanted to create an eflasher image to burn it to other devices.
To do this I followed the following steps:
On the device…
-
Encoding a camera output /dev/video0 (YUYV) to H264 or H265 get lots of horizontal trashed lines as in the frame sample.
![2021-10-09-175443_1282x750_scrot](https://user-images.githubusercontent.com/…
-
Hi,
I executed the **./rbuild -o rk3568-fiq-debugger-uart3m0,rk3568-uart2-m0 rock-3c bullseye xfce** command to enable fiq debugger on uart3 and enable the uart2 as a normal serial port. I can see …
-
Hello, I've noticed something peculiar.
I ran the ResNet50 and ResNet100 network on RV1126. The network file was converted from ONNX to RKNN file quantized to FP16/INT8 using the rknn visualization…
-
rk3568,测试yolov5多batch推理时遇到问题。自训练模型rknn推理,单batch量化没问题,多batch不量化时没问题,多batch、量化后推理有很多无效框且不准确;但是基于yolov5官方模型转的(都是相同的转模型方法)就没问题。
我想知道我训练的和官方模型大概有什么区别会导致这个问题?
-
what a grest job on arm~~~
https://github.com/libsdl-org/SDL/pull/5170
If i have libegl and libglesv2 and libsdl2
can cocos2d-x-arm-opengles run on rk3568 successful?
-
1. CM3I需要添加上
2. https://github.com/radxa-pkg/radxa-overlays/blob/main/arch/arm64/boot/dts/rockchip/overlays/rk3568-spi3-m0-cs0-waveshare35.dts 缺少B型号的支持
-
## Environment
rk3568
## Problem description
Please attach the log file if there's problem happend.
runtime_option = build_tinypose_option(args)
File "examples/vision/keypointdetection/tiny_po…
-
I found a strange place in the dts files for rk3568 boards:
pinctrl-2 = , ;
pinctrl-3 = , ;
Perhaps pinctrl-3 should refer to this pinconfig: soc_slppin_rst