-
Per the suggestions in
http://solorb.com/elect/hamcirc/rockmite20/index.html
Change the power ouptut transistor. The ferrite core and bead are on order. The data sheet for the transistor:
[2N442…
-
Left to its own devices while not transmitting over a period of time that seems to be > 30 minutes, TouCans will build a sufficient amount of charge somewhere that it will reset the RockMite keyer on…
-
Rockmite started emitting muted clicks with no reception of static or other stations, and no keyer control. I assumed the issue might have been do to water penetrating the radio case during the rain. …
-
Add an additional two columns to the kepler.gl station spot csv data file. The first is to track the strength of the received signal from the Rockmite. The second is to label the stations that spotted…
-
Determine how to use the battery to power the radio at least in the home station.
Use the following info:
https://www.electroschematics.com/laptop-battery-secrets-part-1/
-
Design technique for getting half-wave dipole antenna wire tension off the Rockmite Board.
-
There's software that can interpret Morse code. Can it be setup to listen for and automatically detect the KD0FNR Rockmite when testing new releases and fixes?
-
The lead broke away from the RJ45 breakout board.
Resolder, or screw terminal the wire. Use the pinout defined in #7 .
 of the Rockmite half wave dipole by mounting a twine pulley system to a broken cable clip higher up the wall of th…