-
I can move data on an SD card configured as FAT partition and as CP/M slices ok.
However, I am having difficulties with Floppy disks neither 720KB nor 1.44 MB would appear to work.
If I format t…
-
It's time to pull newlib out of the attic and reorganise libsrc so that code can be shared in both directions.
Whilst doing this, I think it would be good to allow build parallelisation to work on …
-
Hi! Any information on the rev 6.1 jumpers? Thank you! -john
-
Running romwbw cpm3 in my sc131; latest version (03 July 2021) of H19term.py crashed when attempting to run wordstar.
H19term set to ansi mode; SC131 and Wordstar configured for ANSI - work fine w…
-
Are the sources published? I have two problems with the binaries published.
Mi rc2014 (fpga based) has the AY and the keyboard PPI on the MSX ports. (A0-A1 for AY and A9-AB for PPI)
What a…
-
Hi Marco ! Congrats for your excellent work! Really enjoying your Terminal with an SC126 RC2014 board. Only one question, how do I change the source code in vt100.spin to set a different color for the…
-
CP/NOS (Network Only System) is a way to run CP/M on diskless machines, or to run on machines without involving any local disks.
It can be loaded from ROM (or other offline storage) or booted over …
-
Hi Wayne,
I have either found a bug in RomWBW or have misunderstood something.
I have built a SC126 computer (Stephen Cousins, Z180). It has an SD card adapter, equipped with a 4GB SD card.
The…
-
So I wrote an emulator for the machine and then I ported Fuzix to it. Not tried it on a real board yet.
https://github.com/EtchedPixels/EmulatorKit as z80retro
At the moment it boots from ROM be…
-
I've been running some reconfigured builds for testing [dinolab's V9958 card](https://www.tindie.com/products/dinotron/v99x8-msx-rgb-video-module-for-rc2014-v38/) and checked out the latest snapshot, …