-
In the `2024-10-16` build of the RP2350 Datasheet, under [Section 2.1.3 Atomic Register Access](https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#2.1.3.%20Atomic%20Register%20Access) ther…
-
I'm trying to build one of my z80pack VM's for the RISC-V instead of the ARM cores. Looks like FatFs is not prepared for this yet?
Scanning dependencies of target picosim
[ 10%] Building C object …
-
I am getting some boards with the new RP2350 micro-controller on them in the next couple of weeks. Speciifically I am getting
- [Pimoroni Pico Plus 2](https://shop.pimoroni.com/products/pimoroni-pi…
znmeb updated
2 months ago
-
Now users are starting to see the new Pico2 on the RP2350 chip.
Is it possible to organize the code here so as to also get the firmware for the ZX-Spectrum emulator for the new Pico2?
-
[ 90%] Building C object usb/host/tinyusb_host_examples/msc_file_explorer/CMakeFiles/tinyusb_host_msc_file_explorer.dir/home/peterh/source/pico2/pico-sdk-rp2350/src/rp2_common/pico_stdio_rtt/stdio_rtt…
-
I wanted my Pico 2’s default architecture to be risc-v, so set CRIT1_BOOT_ARCH (`picotool opt set crit1.boot_arch 1`).
The chip now runs at one third the nominal rate (50 MHz instead of 150).
-
RP2040 successor : https://dmitry.gr/?r=06.%20Thoughts&proj=11.%20RP2350
* 2x Cortex-M33F
* improved DMA
* more and improved PIO
* external PSRAM support
* variants with internal flash (2MB…
-
**Describe the problem you have/What new integration you would like**
Please consider adding platform support for the new RP2350 MCU and their official Raspberry Pi Pico 2 development board. …
Hedda updated
2 months ago
-
@aallan @petewarden Please consider updating this [pico-tflmicro](https://github.com/raspberrypi/pico-tflmicro) port of TensorFlow Lite Micro library with all the latest changes from upstream TensorF…
-
Please consider looking into adding platform support for the new RP2350 MCU and the Raspberry Pi Pico 2 development board.
RP2350 is the successor and next-generation of RPi RP2040 so guess would n…
Hedda updated
1 month ago