-
This library is great and let's me use my code on pi5 or pi4
normally i just:
sudo apt remove python3-rpi.gpio
sudo apt install python3-rpi-lgpio
and it works!
but i made a mistake t…
-
Previous work on an R.Pi.4 is throwing an error on the R.Pi.5.
I'm using apa102_pi and the demo script therein:
https://github.com/tinue/apa102-pi/blob/main/runcolorcycle.py
and seeing a 'GPIO …
-
Hi all,
I am trying to access a TPM connected to the i2c bus 0 from U-boot without any success. I have a custom board with a CM4 and I am using Scarthgap release. The i2c bus used is 0 connected t…
-
- Fresh install from RPi image
- PrusaLink 0.8.1
- Prusa Connect SDK 0.8.1
- MK3S+ 3.14.0-8066
- RPi Zero 2W connected via GPIO
I want to use USB OTG Wi-Fi dongle for better Wi-Fi signal recept…
-
Does it work on Pine A64-LTS? When i'm type in python3 prompt `>>> import RPi.GPIO` i got
`Traceback (most recent call last):
File "", line 1, in
File "/usr/local/lib/python3.5/dist-packages/…
-
I think we should review this, so the pin colors are derived from either the general function of a pin (programmable, gnd, 3.3v, 5v etc), or the selected PinFunction.
And extend it to cover the fun…
-
Spawned from issue #3: Monitor mode only listens to kegboards, but we've had some long-standing requests for RPI GPIO support. Add a trivial flow meter daemon for these pins.
mik3y updated
6 years ago
-
It looks like Raspberry pi needs some time after `export` to link the digital pin properly.
``` go
package main
import (
"fmt"
"os"
"time"
)
func main() {
exporter, …
-
Node-red: 3.1.8
node-red-node-pi-gpio: 2.0.6
Nodejs: 20.12.1
Raspberry Pi 5 (64bit)
My flow uses multiple "rpi-gpio in" nodes to monitor if an IO port is 0 or 1. Debouncing is set to 100mS (chan…
-
Hello OM.
I have been successfully operating several repeaters with Svxlink for years and have written a small manual for the installation and configuration. Up until now, the installation worked wit…