-
### The problem
Setup:
HomeAssistant Green device
Mosquitto broker installed & working
rtl_433_next never worked (didn't auto-connect to mosquitto)
Successfully installed rtl_433, and device ping…
-
A bit of a strange one here. I have two USB dongles, as I use welle-cli to record programmes and often want them from multiple multiplexes.
If I start AbracaDABra when there isn't a welle-cli proce…
-
This device is similar enough to the ThermoPro TP829B that I was able to key off of the support implemented for it, but different enough that the existing encoder isn't working.
I have the followin…
-
Executing:
```
./krakensdr_x86_install_doa.sh
```
emitted an error:
```
rtl_daq.c:49:10: fatal error: rtl-sdr.h: No such file or directory
49 | #include "rtl-sdr.h"
| ^~~…
-
### Current Situation
With Bruno's help, we managed to decode VEVOR Wireless Weather Station 7-in-1 with rtl_433 and RLT- SDR stick
https://github.com/merbanan/rtl_433/issues/3020
but my goal is to…
-
hi @wiedehopf , tnx for your work i really appreciate it. tar1090 helped me a lot to get an broken dump1090 ->FA24/adsb-x working again :-)
i do a new installation of ads-b infrastructure on an RPI…
-
I have a Nooelec Nano 3 that I'm trying to use for 433 MHz signals with dedicated SMA antenna for 433 MHz (it's about 17cm long and was sold to me as a 3dB antenna).
I notice strange behaviour wit…
-
When starting a configuration containing the WDSP plugin, SDRangel immediately crashes:
```
-------------------------------------
Translated Report (Full Report Below)
--------------------------…
-
Hi,
Could you please add support for SDRPlay devices?
- RSPdx and RSPDuo
Also RTL_TCP (most used form of connection to RTL SDR) and Spyserver (used by SDR#)
-
When starting Satdump in CLI or GUI mode on the Raspberry Pi, the starting frequency isn't correct. In the GUI, when you change the frequency the SDR sets to the correct frequency. The CLI version can…