-
Hello,
When device is bluetooth 5, the function self._use_ext_scan() return True.
Then HCI_Cmd_LE_Set_Extended_Scan_Enable is actived.
But the normal le scan is not actived and no beacon 4.0 messag…
-
I've a kind of generic USB Bluetooth adapter, that uses a Realtek 8761 firmware.
In Linux Mint 21.3 there was a bug that made the system load the wrong firmware. Instead of loading the file the fi…
-
I ran an `rpi-update` a few days ago to test if it solved some SPI CS issues, and since then the Bluetooth stack on my Raspbian on RPi4 has been broken (although I can't completely rule out if it was …
-
Could a Bluetooth controller firmware be built for EFR32 that is compatible with Home Assistant's native Bluetooth integration?
https://www.home-assistant.io/integrations/bluetooth/
That is, cou…
Hedda updated
1 month ago
-
Can you add ability to change antenna power in Z2M?
I have one sensor at a fairly large distance from the Zigbee stick and some data loosing. It would be a good idea to manually control the TX ant…
-
when starting the Shiny_Hunter.py command the screen remains stuck at the pairing screen where im able to read current state: WAITING_PAIRING_SCREEN but im there and no idea
-
盒子是YST,u盘启动没有问题。写入EMMC时,选305时开机黑屏,机器红灯,应该没有启动; 但选304时则正常启动。这个算bug吗?测试了5.15, 6.1, 6.6的核心,结果一样。
另外问, 在自定image 时,device board里面有一个s905l3a-cm311, 这个跟s905l3a有什么区别吗?
-
最近刷了一台mgv3000机器,s905l3的cpu,带蓝牙rtl8761btv,这款芯片很容易驱动,就想着能否修改dtb增加蓝牙串口驱动蓝牙播放音乐什么的。
最开始clone了unifreq的kernel,照着dtsi一顿修改,然后用dtc编译,结果搞了半天还是没搞定问题,是include写法太无语了。。。自己还特地写了两个脚本把它都替换掉,但是还是没有成功
最后我还是选择了反编译,照着cm…
imzlh updated
1 month ago
-
Hello, I am a rookie in using USB WiFi adapters on gnu/linux. I always read that it was recommended to buy MediaTek adapters and review the list of compatible in-kernel drivers so that they work out-o…
-
### Describe the issue you are experiencing
I believe this is the third time this happened to me. Home Assistant is usually running fine for days with stable memory usage and then suddenly memory usa…