-
It would be good if there was a way to determine the component version at compile-time as that way it would be easier to make the code compatible with multiple component versions (if there were any in…
-
Today with the conditions we have 3 possibilities:
accept1 | At least one accept must be true to signal a true for the complete condition (OR-Rule) | FilterType | 0..*
-- | -- | -- | --
r…
-
**The Problem To Be Solved**
The `*.cbuild.yml` file makes the API headers available, but does not provide a direct link to the API documentation.
**Suggestion**
Add node `api-doc:` as shown …
-
**The Problem To Be Solved**
From a users perspective it is hard to understand:
- what is the purpose of a software pack
- what components are available in a pack
- what other packs will b…
-
Hi all,
I'm implementing a low power application based on CMSIS RTOS2 with ATSAML22 MCU. I have an RTOS2 tick-less operation like this:
```
// OS Idle Thread
__NO_RETURN void osRtxIdleThread (…
-
之前使用2.0.0版本,程序调好没有问题,后面升级为2.1.1,发现调用新版的smartconfig库(2.5.5)smartconfig_start()函数之后再调用vTaskDelay()函数出现时间错误,延时时间变为原来的1/2。
SDK采用2.1.1,将2.5.5版本的smartconfig库更换为2.5.4版本后没有出现错误,这里推断2.5.5的库有问题
-
Per https://community.platformio.org/t/cant-find-cmsis-rtos2-on-nucleo-l452re-with-stm32cube-framework/18713.
The current builder script only uses a few things from the Drivers/CMSIS folder of the …
-
The explanation of the RTOS2 api call osKernelGetTickCount(), at
https://www.keil.com/pack/doc/CMSIS/RTOS2/html/group__CMSIS__RTOS__KernelCtrl.html#ga84bcdbf2fb76b10c8df4e439f0c7e11b
includes a …
-
While including RTOS2 API, file `RTC_config.c` contains `osRtxErrorNotify()` which gives a compilation warning:
_No return, in function returning non-void_
It's not a big issue, I know...
-
The reason why programs using this version of CMSIS-RTOS2 is because of the way the `SysTick_Handler()` and the `irq_cmX.S` files are implemented.
The `SysTick_Handler()` wants to call the `osSysTi…