-
Firstly, great work on this project! Very nicely done and documented.
We tried connecting a Wifi6 and also a Wifi5 Intel M.2. cards to J1 Key-E on the board. While the Wifi came up fine after instal…
-
`dmesg` shows
`aicbsp: sdio_err:: bus down`
`sudo journalctl -u systemd-networkd -f` shows
```
Sep 24 11:45:00 rock-zero3w-ubuntu-rockchip systemd-networkd[734]: wlan0: Configuring with /run/sys…
-
New RPI ZERO 2W uses chip BCM43430/1 with firmware 7.45.96.s1 (gf031a129). It appears that there is no patch for this firmware...
Here is original firmware which works ok, but don't have monitor mode…
qrp73 updated
2 weeks ago
-
Hello,
i see error after
## insmod esp32_sdio.ko
esp32_sdio: loading out-of-tree module taints kernel.
esp_probe: ESP network device detected
Rx Pre ====== 0
esp_handle_isr: CMD53 read/write e…
x893 updated
5 months ago
-
Implementation with OPT_SERDES=1 fails with error "multiple driver nets". The issue is that `o_mine` is assigned twice in `xsdserdes8x.v`. After removing the second assigment on line 188 implementatio…
-
It'd allow for easier work later if the sdmmc driver was converted from virtio on the ARM9 to full SDIO control on the ARM11. This would free up bandwidth for the ARM9 to have more devices that are le…
-
### Code of Conduct
- [X] I agree to follow this project's Code of Conduct.
### Issue reporting checklist
- [X] I have read and understand the [issue reporting policy](https://docs.raspap.com/issue…
-
Hello,
On gpio pins there is alternate option for SPI. I would like to use SDIO for connecting a wifi chip, how can I do it?
mbt28 updated
6 years ago
-
### Answers checklist
- [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [X] I have used …
-
Hello.
First of all, thank you for this incredible project. I am interested in assembling this project on my protoboard. I have doubts about the microcontroller. Can I invest in the STM32F411 model (…