-
Despite disabling the console using raspi-config, getty still takes control of both ttyS0 and ttyAMA0.
Version:
Raspberry Pi OS with desktop
Release date: March 15th 2024
System: 64-bit
Kerne…
-
Hello Collin, would this run on ESP-32 Dev Kit C V4? Does anything else need to be changed? The data comes via 'USB serial port' ??
Nice greetings from Germany[
![Screenshot 2024-04-25 at 21-50-49 E…
-
Arduino 8E1 format is 8 bits of data, one even check, one stop, a total of 10 bits of data.
The traditional CH32 and STM32 are 7-bit data one-bit check, so there is one less.
To solve this problem…
4061N updated
2 weeks ago
-
the debugger ain't working
-
Hello, When ever I try to connect via serial, the option is greyed out. Any help would be great.
-
### What happened?
I have multiple access point broadcasting the same SSID, however, the list provided over Improv seems to be based on BSSID.
![CleanShot 2024-06-19 at 19 49 50@2x](https://github…
-
Hello,
I'm fairly sure I'm doing this correctly but I am unable to open the serial connection to flash a CB3S with OBK.
I am using this USB to TTL module
https://www.aliexpress.us/item/3256805987…
-
My initial idea was to parallelise most of the tests but I realise this will create a lot of unnecessary work.
I now think we should actually make most of the current tests serial only and build on…
-
When i start crelay_arm64 (Version 0.14.1) with the -i Option to get the serial of the relay card with
_./crelay_arm64 -i_
the following output is shown:
_Detected relay cards:
#1 HID AP…
-
The serial on sc7180 has been known to be flaky for a while. Now that we're getting results from those platforms on the new system that we can do some data analysis on, I'm opening this issue so we ca…