-
The current hsflowd allows multiple network interfaces and multiple collectors. However, it doesn't allow allocation of NIC sflow stream per collector, I would like to have that implemented to allow s…
-
I've a problem with very inaccurate sampling rate for 10Gbps link with low traffic (less than 500Mbps). Is it possible to implement a dynamic adjusted sampling rate into hsflowd?
-
Hey Adel, I'm giving it a shot -- I do have the networkconnectivity-test-controller running! But first I want to say a huge *thank you* for the inspiring kubecon talk! This is really neat, and I'm qui…
-
#### Description
The directly attached subnet routes for IPv6 are not installed if the interface belongs to VNET. This works fine with IPv4. The issue might be due to the check here which che…
-
**Description**
Local subnet routes for IPv4/IPv6 are being removed on link operational state down.
This causes packets to be looped thru the default route if any.
**Steps to reproduce th…
-
### Please direct all support questsions to slack or the forums. Thank you.
I am currently running the following telegraf configuration:
~~~
[agent]
debug = false
quiet = true
## Default d…
-
#### Description
#### Steps to reproduce the issue:
1. Initiate a warm-reboot with executing the 'check_mirror_session acls' funtion.
2. Monitor the script execution.
#### Describe the r…
-
#### Description
In hostcfgd daemon, seen that the function "get_interface_ip" is always going to the exception because the variable self.config is not defined.
As a result, the variable "keys…
-
using:
\check_nwc_health --H 10.60.18.13 --mode hardware-health --community {key}
outputs the following on Nagios :
tatus Information:OK - environmental hardware working finePerformance Data:(s…
-
#### Description
show system-health showing error in VS.
#### Steps to reproduce the issue:
1.
2.
3.
#### Describe the results you received:
```
admin@sonic:~$ sudo show system-healt…