-
Is it possible to add support for the HUM1000 to the general Phidgets so the humidity can display in the LCD on the right?
I have purchased the HUM1000 and an FS200-SHT10 Floor Temperature and Hu…
-
Please fill the info fields, it helps to get you faster support ;)
If you have a Guru Meditation Error, please decode it:
https://github.com/me-no-dev/EspExceptionDecoder
----------------------…
-
### PROBLEM DESCRIPTION
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!_
- [x] Read the [Cont…
-
Hello can add the AM2315 - Encased I2C Temperature/Humidity Sensor ?
Here the infos:
https://www.adafruit.com/product/1293
Thank you cu Danny
-
### PROBLEM DESCRIPTION
I connected a SHT10 temperature and humidity sensor to a D1 ESP32 Dev Board and set the I2C SCL and SDA pins. When using the default tasmota-sensors firmware (installed vi…
-
Hi,
I've connected SHT sensor to the NodeMCU V 0.9. When reading sensor data in a loop or with a delay mechanism, it works fine. But I'm trying to get the sensor data in a Timer interrupt using the T…
-
SHT10_uPython - Driver for SHT10 temperature and humidity sensor.
https://github.com/Omgitskillah/SHT10_uPython
No longer exists.
-
First, gentlemen, I want to say that I'm really impressed about this platform. Amazing!
I had some self-developed code but now migrating to HA + ESPHome. And got some issues with AM2320 sensor.
…
-
## Mycodo Issue Report:
- Specific Mycodo Version: 7.6.3
- Hardware: Raspberry Pi 3 Model B Rev 1.2
#### Problem Description
Please list:
SHT10 does not obtain measurements.
When adding the …
-
Hi!
I've been working with your library and I made a lot of improvements/changes to its logic and it is still not working. I think it is a timing issue but I'm not sure. Does this lib work for someon…