-
I really like your app, but I would like to request an additional environment sensor, namely the SHT31 (temperature and humidity).
I know it is currently in their test branch (Test A) but it does wor…
-
hello ,i m using t-hmi and i want to connected with an SHT30 ,but i can't find i2c port .How can i set up the i2c port
-
Hi, I bought a similar round sensor: **TH03Z**
The sensor uses a ZTU module and a 2450 battery.
Ali: https://aliexpress.ru/item/1005005942067380.html
I think the sensor is being used: **[GXHT30](…
-
Using Arduino IDE 1.8.2 I get these warnings, any suggestions on fixing?
/Volumes/Macintosh HD 2/Users/Documents/Arduino/libraries/WEMOS_SHT3x_Arduino_Library-master/src/WEMOS_SHT3X.cpp: In member …
-
I am using 8 M5stacks as esprecense devices and like to add the M5Stack ENV III sensor for temperature and humidity reporting.
is this sensor supported?
thanks
Rien
-
Hello,
I have been trying to use the I2C, pins 32, 33 from the Arduino IDE, and haven't had much luck. Same code, different pins, same I2C devices (BME280, RV-8803) work on a MEGA.
I haven't yet…
-
Got 2 SHT30 shields. The shown temperature is ~30°C, while the real temperature is ~23°C.
I didn't investigate yet, but the temperature is wrong with both shields, very far away from the real one. Th…
-
**Describe the bug**
First Happy New Year! I got a feature request. I have a super generic aliexpress temperature and humidity sensor (doens't even have a name). Flashing and GPIOs are working, but t…
-
Hello,
Thank you for this library.
SHT30 sesnor comes with built-in alert pin which can be activated ex. if humidity is higher then set.
Details 3.5 (page 9) of datasheet:
[https://www.mouser.…
tikky updated
2 years ago
-
I get this compile error, but the sketch uploads fine afterwards and works on the Wemos.
I have two sensor defined in the sketch:
```
SHT3X indoor(0x45); //0x45 is the default address with co…