-
Add code from https://github.com/phdlee/uvk5cec/tree/main
To add SI4732-A10 support for full hf
I realy want to add this mode but all the firmwares are basic and last luster , I don't want to s…
-
Hi, as you may remember I was one of the first to take this HF modification seriously :) Incredible how many people, thanks also to the availability of ready PCBs, are now playing with your software t…
-
Hi,
I have a modded radio and would like to use this firmware on mine.
Will there be support for the Si4732 modification in the future?
-
Hello! In accordance with the instructions, I downloaded Espruino to my ATS-100, successfully downloaded all the necessary Java scripts using WebIDE, but for some reason the program cannot start. "Loa…
-
Hi
Your instructions for where to attach the battery sensing hardware could cause problems if the radio was not used for a long time.
Specifically the instruction to connect **directly** to the …
-
On K5WEB I went to LOSEHU DIY and loaded firmware with English, spectrum, SI4732 and enable SSB. The firmware displays LOSEHU130ES. When I tried to write the SSB Patch, K5WEB says Firmware Not Support…
-
-
The following fixes are needed on the RDX-rp2040 (Si473X chipset based) board.
- Pull-up resistor from pin 3 of Si5351 (SDA) to +3.3V.
- Pull-up resistor from pin 4 of Si5351 (SCL) to +3.3V.
- Ad…
-
Much appreciation for the work.
I noticed a 1.5 kHz downshift for correctly when listening to a station in SSB.
Can you fix this?
BFO = 0.
Checked with professional shortwave equipment.
Bes…
-
Hello. Thanks for your effort.
I have flashed your firmware with the following options:
![image](https://github.com/user-attachments/assets/ad0954a4-874d-4dc2-9935-87d4d43d64c5)
![image](http…