-
I just bought the new accucell 80W (with XT60 input connector and usb port), http://www.hobbyking.com/hobbyking/store/__64345__Turnigy_Accucel_6_80W_10A_Balancer_Charger_LiHV_Capable.html
After succe…
-
My System:
Win10
MC3000 Firmware 1.18 - Updated via the MC3000_Firmware_Update__V1.18.exe
skyrc-mc3000-2.1.0-alfa
I am executing the file mc3000usb.py - works fine
```
if task == "save"…
-
| Название | Значение |
|---|---|
| __Производитель__ | Skyrc |
| __Модель__ | skyrc.pet_waterer.fre1 |
| __Прошивка__ | |
| __WEB Build__ | 1.4.15 |
| __API Build__ | 1.9.9 (11367) |
Деталь…
-
Greetings, perhaps someone can help me here. I wanted to update an accucell 6 80W with firmware 1.2 to 1.3, but something went wrong and it froze mit update. It comes with a built-in USB interface and…
-
I have a Mavic 2 Battery that was in storage too long and a cell went under voltage too far and the BMS Chip locked it out.
Opened it up hoping to use the tools to open and clear the PF flag but th…
-
Hi
Just read some of your posts on BLF (https://budgetlightforum.com/t/skyrc-mc3000-help-thread/51269/93?page=5)
and wanted to try your software :)
Alas, even tho I can see a "Simple BLE Peripheral…
-
In my device Skyrc MC3000 (fw. 1.15 hw >=2.2) channel numbers are: 0,1,3,7 instead of 0,1,2,3
**To Reproduce**
If I use (Python 3.11):
await mc3000.start_charge(2)
no effect, and:
await m…
-
This issue is to collect devices that use miot protocol for communication, which will help with future development efforts.
If you know about a device that is not listed here, please add a comment …
-
During some test on the rope, I found a little problem with deceleration near to the end points. I see this in autoplay, but it is the same if you drive the cablecam to end points at max speed.
The p…
-
Nutri Vision Mini was added to Xiaomi Mi Auto without any problems. The feed supply works, but the dose is very small. How can I set it up so that a large dose of feed is fed when turned on?
Home A…