-
Hey,
very fine project, meeting quite exactly my use case: getting my SmartSolar values via bluetooth and mqtt into the home assistant of my camper.
Sadly, I'm missing these values: "virtual load …
-
I have a BMV-712 connected that has the correct temp sensor connected to it and a SmartSolar 150/30 MPPT.
The temperatures are not listed on the Temp tile, but do appear in VRM.
The temp is not …
-
Hi,
tldr: Need assistance to control 2 Deye Sun600 via the service "Write Multiple Holding Registers", at the moment only 1 Deye Sun600 is controllable via the Solarman integration.
I have the f…
-
Nicely integrated SmartSolar MPPT 75/15 and Smart BatteryProtect 12V/24V 65A.
Thanks for your code!
So far all running fine, except the unknown device state msg.
text_sensor:
- platform: vic…
-
The latest beta version (e.g SmartShunt or SmartSolar) send the current measurements via broadcast data. Which means you can read them without connecting to the device. What a great feature.
the on…
-
First of all I would just like to say thank you so much for releasing this code in order to pull in my stats into ESPHome for my mppt controller. I am not sure if this is how the code currently works …
-
-
I like to refer to an problem with DVCC functionality, which is not working according to [description of DVCC manual.](https://www.victronenergy.com/media/pg/CCGX/en/dvcc---distributed-voltage-and-cur…
-
Hey there,
I'd be interested in the ability to set the Current Limit over bluetooth, based on other system variables, in realtime.
Is that possible at all with the current approach to this, has it…
-
I tried to create a branch so I could push this directly. If you want to add it these are confirmed to pull the additional values from an MPPT charger.
```
enum VE_DIRECT_DATA {
VE_DUMP = 0,
V…