-
## Alarm system
Describe your panel model (ex: EVO192, Spectra SP4000, Magellan MG5050), access mode (Serial, IP150, etc..).
SP6000+, with ESP32 Serial/IP adaptor. Have tested on 1.05, 1.10 and 1.20…
-
## Alarm system
Sp4000
## Environment
HOME ASSISTANT RPI
### Git branch
Home Assistant Add On
## Question
I cant trigger the alarm neither by calling a service or by calling an action. Can any…
-
## Alarm system
Paradox MG5075
## Environment
Linux armbian on odroid-c2
### Git branch
none for now
## Question
Hi there
I'm about to buy an alarm system and because of this softw…
-
## Alarm system
EVO192 and IP150
## Environment
### Git branch
## Question
I wrote this [Vera plugin](github.com/a-lurker/Vera-Plugin-Paradox-IP150-wps) sometime back that scr…
-
## Alarm system
EVOHQ via IP150
## Environment
PAI Docker
I wanted to use it on my MyCloudEX2Ultra nas (arm cpu) but the same happens in my Linux host
### Git branch
stable release (2.…
-
Hello, Changing Zone name, at the Alarm Panel seams to generate two names for one zone within home assistant.
I have tried everything accept restarting your plug in from scratch as Im happy with it. …
-
So i have the following issue at the moment.
If i set config file to Serial and do the following
/home/ha/dev/ttyV0
`socat pty,link=/home/ha/dev/ttyV0,waitslave tcp:172.16.103.60:23`
to create…
-
When starting addon in Home Assistant I get the following dump:
Error parsing configuration: Invalid value type for config argument SERIAL_PORT.
## Alarm system
Magellan MG5050 with IP150 >…
-
## Alarm system
SP5500
## Environment
-->HASS.IO on RP3B+ with Serial Connection over telnet via ESP32 (Connected RX to TX2; TX to RX2. GND and VCC not connected. Tried swapping Rx with Tx, …
-
Hello, I'am trying to intergrate this to my openhab2 setup at home, and having issues with the physical connections including the resistors and pins, could you provide some sourt of schematics?
The c…