-
## Environment ( 実行環境 )
- MCU or Board name: board-esp32-devkit-c-v4
- Panel Driver IC: ILI9341
- Bus type: SPI
- LovyanGFX version: 1.1.16
- Build Environment: PlatformIO
- Operating S…
-
hello!
is it possible to build 1ch GW on RPI4 Ubuntu 24.04 + Waveshare SX1262 LoRaWAN HAT and use it with Chirpstack Network Server for working with nodes based on Heltec Cubecell and RFM95 based n…
-
Hello,
I have got a small PCB board which has GPS(BN220) connected and it works fine
```
Second analog to digital sensor is not detected
Foreseen GPS type is Ublox (configured by oXs) :GPS i…
-
**Describe the problem you have/What new integration you would like**
Using SPI to drive displays, all combinations of GPIO pins I've tried do not give HW SPI. Always reverts to SW SPI. The RP2…
-
Only raise issues for problems with the library and/or provided examples. Post questions, comments and useful tips etc in the "Discussions" section.
To minimise effort to resolve issues the followi…
-
When i run the sudo ./fbcp-ili9341 command the screen gets a bit brighter but remains white. And i get a Bus Error.
```
pi@raspZero:~/fbcp-ili9341/build $ sudo ./fbcp-ili9341
bcm_host_get_periphe…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
**_Dear All,
I want to compile SW for my new ESP32 T-Display-SW but already compiling der GFX Library will result in several errors**
`#include
#include
void setup()
{
Serial.…
-
### Board
NodeMCU-32S
### Device Description
![NodeMCU-32S-details-3](https://github.com/user-attachments/assets/f9e0bced-610e-4aea-ab84-2b97d777500b)
### Hardware Configuration
#ifnd…
-
I have built one snsor whit a GPS M10 series, and I have connected it to a FRSKY receiver and Tx X20S. The data of Lat, Lon, Alt, Speed work correctly but the route always marks zero. Does anyone ha…