-
@TobiasKletter
As discussed with Simone it appears that the SpindleWidths are systematically underestimated. I will work on this. Could you please post here a screenshot of how you manually assign sp…
-
Current spindle bracket is in poor condition and has been inadequately repaired multiple times.
A new design has been roughed out and priced at around $650 to have made.
https://cad.onshape.com/do…
-
Hi Terje Io
after the Stepper Spindle do you intend to write a plugin for AC Servo controlled in Modbus to be used as a spindle? I attach you manual (see Chapter 9) and a code for Arduino Nano as an …
-
Am going to have another look at spindle load reporting for VFD spindles, this time just as a percentage (following discussion in previous [PR](https://github.com/grblHAL/Plugins_spindle/pull/6), and …
-
It seems that when spindle linearization is enabled, the values of $31 (Setting_RpmMin) and $35 (Setting_PWMMinValue), are not used for computing the conversion from pwm_data to pwm_value.
https://…
-
I have a Sain Smart 3020 Pro V2 CNC machine
and after updating to a bigger spindle,
and when connecting to Candle,
it shows error message in terms of spindle
(because unlike before, right now I only c…
-
### Is your feature request related to a problem? Please describe.
I have an external Spindle Driver for standard brushed type DC motor I would like to use.
- I need to be able to set M3 using the…
-
The spindle does not move beyond the starting point. It burns only in one spot. I have downloaded all the custom buttons but cannot get the project to go beyond one point. I am new to this hobby, so…
-
I'm seeing a stange behaviour.
If I set my UART GPIO pins via the new variables, I'm not able to TX via the serial console, If I leave it by default it works fine PIN 34/35.
#define UART_RX_PIN …
-
Hi!
Excited to see this new plugin in Open Ephys!
I am a postdoc working on a very similar project: I target sleep SPINDLES, rather than ripples, where after online detection in the LFP, I apply opt…