-
```
What steps will reproduce the problem?
1. Install RaspberryPI using Raspbian image
2. Start squeezelite using /usr/local/bin/squeezelite-armv6hf -o default -n
Kantoor -d all=debug -f /var/log/squ…
-
Squeezelite-ESP32 fails to run when LEDVU is enabled without a display.
The SETD message sends 0 in the display sizes followed by the ledvu strip length. The current code ignores this and still en…
-
Trying to run the above on the following setup:
Raspberry Pi 4
piCorePlayer v8.1.0 | www v00017 | linux 5.10.77-pcpCore-v7l (32) | piCore v13.1 | Squeezelite v1.9.9-1392-pCP
It fails to downloa…
-
```
What steps will reproduce the problem?
1. Install RaspberryPI using Raspbian image
2. Start squeezelite using /usr/local/bin/squeezelite-armv6hf -o default -n
Kantoor -d all=debug -f /var/log/squ…
-
```
What steps will reproduce the problem?
1. Install RaspberryPI using Raspbian image
2. Start squeezelite using /usr/local/bin/squeezelite-armv6hf -o default -n
Kantoor -d all=debug -f /var/log/squ…
-
```
What steps will reproduce the problem?
1. Install RaspberryPI using Raspbian image
2. Start squeezelite using /usr/local/bin/squeezelite-armv6hf -o default -n
Kantoor -d all=debug -f /var/log/squ…
-
I appear to have encountered an issue attempting to play media to a Squeezelite-ESP32 device with a display attached which causes both Home Assistant (through the SlimProto integration) and MusicAssis…
-
Hi,
first of all, thanks for documenting this.
I just bought an Arylic Amp, which turns out to be just a relabeled unit from Rakoit (https://www.rakoit.com/product/wireless-audio-board-2-1-amp/)…
-
Hi,
I want to build a boombox for my daughter with only 1 button to play an m3u until the end, idealy 2 buttons (1 for kid music 1 for story told).
Any idea how to do this ?
Regards,
fensoft
-
Hi,
sorry to report here in the issue section I am quite sure it's only a config problem I have. Maybe someone has an idea. I am not an Linux expert but with some try and Error and your excelent do…