-
2 bit gray levels works fine, but is it possible to implement 4 bit gray levels for SSD1322?
-
I want to help sir.I can't make circuit same your project.
Now I have :
-Blue pill board stm32f103c8t6
-3.1" OLED ssd1322
I flashed your Release already >> firmware_nobootloader.bin by stlink…
-
Hi guys,
I'am in the process of upgrading my project from Python 3.7 to 3.9 but the Luma.oled library is spazzing out.. In the attached picture you see a scrolling text. With 3.7 everything works fin…
-
Hi, the screen works fine, but I want to rotate content on the screen 180 deg in my case.
disp.rotate(True) won't work
full example:
```
import ssd1322
from machine import SPI,Pin
spi = SP…
-
This version is not working anymore, any chance to get SSD1322 working with adafruit?
Thanks
-
Hi,
I've a display which has a resolution of 256x64 Pixel (SSD1322 controller) and I need also small font sizes (8px and so on).
But every rendered font don't look very pretty. Is it possible to ed…
-
Hello,
First, thank you for the library. It is incredibly helpful.
I have purchased one of the 256x64 OLEDs using a SSD1322 driver and have it connected to a Pro Micro (32U4).
The display wo…
-
While using test_load_image in the "old" section for ssd1322, only a garbled square is shown. Its about 1 4th of the entire display width.
Any tip on what might cause this?
-
It would be nice to use the adafruit library https://github.com/adafruit/Adafruit_Python_SSD1306
-
Didn't know where to put this, or contact you, so I'll put it here:
Which controller IC did you use for your display? Is it a 256x64 pixel one?
Those are usually SSD1322, and the 128x64 ones uses S…