-
As discussed in Issue #1960, ZJY M-150 displays were added. However, my Display doesn't work with I2C. There seems to be something wrong with the constructor, because I get an error. I just uncommente…
-
Please add support SSD1327 128x128 OLED.
I think it would improve the use, if a larger OLED screen could be used.
I2C OLED Display Module 1.5" Arduino LCD SSD1327 Driver Chip 128X128 Pixel Sma…
-
Hello,
Thanks for that driver. I had a speed issue using it, and on screen flickering also. Then I noticed my CPU was taking 130 to 140ms to send the 8K buffer to the display. So I had a look into …
bk4nt updated
4 years ago
-
Hi,
I am observing an issue where a thread locks up when a library I want to use in it uses delay(). Here's what I have:
```
#include "Arduino.h"
#include
#include "SSD1327.h"
#define PIN_C…
-
#### Type of Raspberry Pi
RPi 3 B+
#### Linux Kernel version
Linux raspberrypi 4.19.57-v7+ #1244 SMP Thu Jul 4 18:45:25 BST 2019 armv7l GNU/Linux
#### Expected behaviour
The examples on…
-
Please add sh1107 OLED displays with 128x128 pixels to the supported displays.
at the moment only sh1106 displays with max. 128x64 are suported. when connecting a sh1107 display only parts of the d…
-
The SSD1327 supports optimized vertical/horizontal scrolling commands ([datasheet](https://www.displayfuture.com/Display/datasheet/controller/SSD1327.pdf)).
It would be neat if the driver could hel…
cdata updated
3 years ago
-
To get this screen working on a Raspberry Pi Zero 2 W _without_ having to use a [CircuitPython image](https://circuitpython.org/board/raspberrypi_zero2w/), I needed the following Python dependencies:
…
r3w0p updated
7 months ago
-
```
add support for I2C display
```
Original issue reported on code.google.com by `olikr...@gmail.com` on 13 Jun 2012 at 7:24
Attachments:
- [u8glib_avr_v1.04_changes_uc1610_dogxl160_hw_i2c.zip](htt…
-
```
add support for I2C display
```
Original issue reported on code.google.com by `olikr...@gmail.com` on 13 Jun 2012 at 7:24
Attachments:
- [u8glib_avr_v1.04_changes_uc1610_dogxl160_hw_i2c.zip](htt…