-
I use ESP32 CAM.
> User_Setup.h
```
#define ST7789_2_DRIVER // Use this definition for ST7789v2
// Define the display size
#define TFT_WIDTH 240 // ST7789v2 240 x 240 pixels
#define …
-
### The problem
ST7789V2 240 (H)x280 (V) display doesn't work with Adafruit RR 280x240 config option.
### Which version of ESPHome has the issue?
2022.8.3
### What type of installation are you u…
-
I have an ST7789 module that works fine until version 2.5.34, but after 2.5.43, the display is blank.
Hardware configuration including pin configuration is the same, I modified User_Setup_select.h an…
-
@kdmukai suggests that research should be done to port the ST7789 driver to C and then call it via bindings. Keith is unsure this approach will work but assigns an informal 93% probability that it cou…
-
Hi, My display on the GY LCD MLX90640 is broken. I replaced it with "IPS 2.4 inch 24PIN TFT LCD Color Screen ST7789 Drive IC 240 (RGB) * 320 MCU 8 / 16Bit Interface". All colors are inverted :-). What…
-
I've been trying to get a ST7789 display running using the STM32H7 and this driver but it seems like it doesn't work for the H7.
-
ST7789 initialization seems out of date.
In LVGL @ master, LVGL v7 and LVGL v8 the same issue is present, where static noise is displayed to the screen during initialization in st7789.c
I've tri…
-
Only raise issues for problems with the library and/or provided examples. Post questions, comments and useful tips etc in the "Discussions" section.
To minimise effort to resolve issues the followi…
-
Problem: When I use tft.init() after define TFT_MISO as -1, The pin 19 I have inited before can not be write normally
IDE:PlatformIO
TFT_eSPI library version: 2.5.43
Board package version: 6.5.0
P…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…